|Company Name||Goto Testing Instruments Co., Ltd.|
|Country/Region:||Guang Dong - China|
|Contact:||Mr. Liao JingquanManager|
|Last Online:||24 May, 2018|
Standard: ANSI / BIFMA X5.1-2002
Office chair armrests used to test lateral pressure in the loop (with the plumb line into a 10-degree angle direction) under the action of the endurance capacity. Will be fixed in a test chair and the table, adjust dictate fixture in the right place
For Category: All have the armchair.
Test properties: To evaluate the office chair armrests in a loop state of the rotation force endurance.
Test program: The chair fixed to the test surface to 10-30CPM speed along with the plumb line into 10-degree angle back and forth pressure on the direction of the force 400 Newton 60,000 tests in the armrest.
Results evaluation: the structure after the test shall not be destroyed and shall not lose functionality.
Model GJ-002 BIFMA requirements
Dictate the direction and angle of a plumb line into the 10 directions and a plumb line into the 10 (+ / -1) degrees angle direction
Dictate the value of 400 N (90 lbs) 400 N (90 pounds)
Shi Li fixture 120 degrees opening, width 100mm, installed in the 10-degree slope on the
Cylinder stroke 0-80mm
After the pivot high cylinder power continuously adjustable 40-110cm
Register 6 LCD display, power failure memory, output control 60000 times
Cycle speed 10-30RPM or specified 10-30RPM or a designated
Power Single-phase AC220V 0.5A
Dimensions (W * L * H) 140 * 120 * 170cm